VK SL 3800
Well-Known Member
Hi peoples,
Im doing a minor rebuild on a VK EFI Black 202, i dont have a book on this particular model so could i please trouble you for some specs?
Need to know the std size ring lands in the piston, the engine has 30'' over pistons so i need to know if just some 30'' ACL rings will fit or if ill have to work out what brand the pistons are and buy some of their rings. Any suggestions?
Its got a Cam, unknown specs but was a little lumpy on idle thinking its a S2.
So basically all the engine is getting is:
New rings
New big ends
Its got yella terra roller rockers, and straight cut gears ect all the usual mods for a mild 202.
Its getting fitted to an FE Holden running a Delco setup instead of the original Bosch system.
Also, are the tensions the same as a RED 202? i have a book on the early girls.
Mainly just need the Big Ends and Head bolts, the rest should be right.
Cheers Ben
Im doing a minor rebuild on a VK EFI Black 202, i dont have a book on this particular model so could i please trouble you for some specs?
Need to know the std size ring lands in the piston, the engine has 30'' over pistons so i need to know if just some 30'' ACL rings will fit or if ill have to work out what brand the pistons are and buy some of their rings. Any suggestions?
Its got a Cam, unknown specs but was a little lumpy on idle thinking its a S2.
So basically all the engine is getting is:
New rings
New big ends
Its got yella terra roller rockers, and straight cut gears ect all the usual mods for a mild 202.
Its getting fitted to an FE Holden running a Delco setup instead of the original Bosch system.
Also, are the tensions the same as a RED 202? i have a book on the early girls.
Mainly just need the Big Ends and Head bolts, the rest should be right.
Cheers Ben