melly
New Member
- Joined
- May 3, 2009
- Messages
- 3
- Reaction score
- 0
- Points
- 0
- Members Ride
- VT Commodore
Hey i converted my daily 3.8 vt from auto manual a few months ago with a getrag 5 speed gearbox. Everything works fine just the engine light stays on now i got my holidays i want to fix it.
Looked up the fault code #24 vechial speed sensor no signial.
Now im not familiar with commodores but i thought the speedo went through the ecu into D5 (tan wire) and C6 (blue/white wire), my speedo works so is that not ur speed sensor signal as it goes through your ecu? or can some one tell me where it goes into the ecu.
Wiring diagram below auto vt
http://www.memcals.com/rcc_info_wiring.html
Looked up the fault code #24 vechial speed sensor no signial.
Now im not familiar with commodores but i thought the speedo went through the ecu into D5 (tan wire) and C6 (blue/white wire), my speedo works so is that not ur speed sensor signal as it goes through your ecu? or can some one tell me where it goes into the ecu.
Wiring diagram below auto vt
http://www.memcals.com/rcc_info_wiring.html
Last edited: