Welcome to Just Commodores, a site specifically designed for all people who share the same passion as yourself.

New Posts Contact us

Just Commodores Forum Community

It takes just a moment to join our fantastic community

Register

Engine loom connection

Pumba83

New Member
Joined
Oct 1, 2012
Messages
142
Reaction score
1
Points
0
Age
41
Location
Bunbury
Members Ride
1998 vt s-pack supercharged
Hi folks

I've recently dropped my fresh built super 6 back in the vt but I've forgotten where most loom connections go cos it's been a while. I had photos on my iPhone but my darling son has reset default settings and I lost everything. This has probably been done to death but any schematics or drawings/photos would be muchly appreciated

Cheers
Pumba
 

Pumba83

New Member
Joined
Oct 1, 2012
Messages
142
Reaction score
1
Points
0
Age
41
Location
Bunbury
Members Ride
1998 vt s-pack supercharged
Hmm no help don't really wanna wing it
 
M

mwb235

Guest
Send me a PM with an email address & i'll send you an engine/PCM wiring diagram (if i try posting it here it'll be too blurry to read)
 

0081

Member
Joined
Aug 10, 2008
Messages
493
Reaction score
4
Points
18
Location
Sydney
Members Ride
VY s m5 supercharged
Just place the loom on the motor and it should fit and the plugs should fall near the sensor,

also I'm sure most plugs will only fit into the sensor its for. both knock sensors will have the same plug as will the injectors will have the same plugs but you should see where they go quite easy
 

Not_An_Abba_Fan

Exhaust Guru
Joined
Aug 18, 2006
Messages
14,639
Reaction score
1,369
Points
113
Location
Bunbury, WA
Members Ride
Strange Rover
As above, the plugs will go where they fit. There will be left over plugs as well. Unless you totally removed the loom, then all the plugs will be pretty close to their respective connectors.
 
Top