Engine mounts vn?

[ucwepn]

When mine were done the solenoid cap came loose from the starter motor, to start it had to push the cap on the end in. Worth a try. Got super annoying in the end needing 2 people to start the car so i got a new starter motor, genuine bosch (one of the last made).

 

[Krisp]

there is a earth wire on the drivers side engine mount bracket

 

[vaxx]

I got sick of breaking mounts every few months and made some using a 2" x 4" nylothane bush as the center. Bolt thru bracket to bottom mount. Steel casing for the bush to go to the top mount. Almost solid, but with enough give to take the vibrations out

 

[Krisp]

I got sick of breaking mounts every few months and made some using a 2" x 4" nylothane bush as the center. Bolt thru bracket to bottom mount. Steel casing for the bush to go to the top mount. Almost solid, but with enough give to take the vibrations out

bet your neighbours got sick of you revving your guts out every where you went also

 

[vaxx]

No neighbors here Great thing about the bush.

I'm only running a 2 1/2" hotdog after the cat with a 3" straight pipe under the diff .

Surprisingly not that loud. 87 db at 5000 rpm

Got sick of the engine jumping around under brakes and acceleration.

Disturbing weight transfer in corners.