Harvs82
Active Member
- Joined
- Dec 29, 2005
- Messages
- 1,134
- Reaction score
- 24
- Points
- 38
- Age
- 41
- Location
- Glen Waverley VIC
- Members Ride
- MY08 Subaru Liberty GT-B & MY16 VF II SS Redline
Hi All,
I've decided to change a couple of the pulleys on my engine as the bearings are shot. The pulleys in question are the one on the tensioner bracket, and the one directly below the coil packs.
I'm just wanted to check which way to undo them. I'm assuming that the pulley under the coil packs is just the normal thread, ie undo anticlockwise, but the one for the tensioner pulley is it a left handed thread to undo it?
Just wanted to check before I end up damaging something....
Cheers
I've decided to change a couple of the pulleys on my engine as the bearings are shot. The pulleys in question are the one on the tensioner bracket, and the one directly below the coil packs.
I'm just wanted to check which way to undo them. I'm assuming that the pulley under the coil packs is just the normal thread, ie undo anticlockwise, but the one for the tensioner pulley is it a left handed thread to undo it?
Just wanted to check before I end up damaging something....
Cheers