Welcome to Just Commodores, a site specifically designed for all people who share the same passion as yourself.

New Posts Contact us

Just Commodores Forum Community

It takes just a moment to join our fantastic community

Register

Eurovox amplifier wiring??

Han00105

New Member
Joined
Dec 20, 2012
Messages
8
Reaction score
0
Points
0
Location
Hamilton, Victoria
Members Ride
VF Evoke
G'day just wondering if anybody could help me.
I need a wiring diagram for the Eurovox VT/VX amp that is for the rear subs


cheers for any help :)
 

Attachments

Tasmaniak

Not a valid input....
Joined
Apr 30, 2005
Messages
8,094
Reaction score
126
Points
63
Age
38
Location
S.E. Melbourne
Website
www.ranjinstallations.com.au
Members Ride
VR Stato, C180 Kompressor, Prado and Ka
Hey Han... I'm going to do this from memory but it should be pretty spot on.....

Power
Orange/Black - Constant power
Black (or Black/Green) - Negative
Yellow - Accessories

Input It gets tricky for the old thinker here as there was two possibilities dependant upon car.
You could have...
Left (+) - Brown/Black
Left (-) - Yellow/Blue
Right (+) - Blue/Orange
Right (-) - Blue/Black

But you could also have...
Rear Left (+) - Brown/Blue
Rear Left (-) - Yellow/Blue
Rear Right (+) - Brown/Blue
Rear Right (-) - Yellow/Blue

Output
These have never changed...
Yellow/Red - Left Positive
Yellow/White - Left Negative
Green/Red - Right Positive
Green/White - Right Negative

.... go on, now tell me that doesn't match up to the **** you've got! lol

Hopefully I've provided some insight.
 

Han00105

New Member
Joined
Dec 20, 2012
Messages
8
Reaction score
0
Points
0
Location
Hamilton, Victoria
Members Ride
VF Evoke
Thanks for that I have the input and output sorted but I'm left with 2 orange and blue and 2 blue and black
 

Tasmaniak

Not a valid input....
Joined
Apr 30, 2005
Messages
8,094
Reaction score
126
Points
63
Age
38
Location
S.E. Melbourne
Website
www.ranjinstallations.com.au
Members Ride
VR Stato, C180 Kompressor, Prado and Ka
Orange is constant and black is negative

Verify but I think you'll find that the blue will be a remote turn on wire. It's the only thing left.
 

Han00105

New Member
Joined
Dec 20, 2012
Messages
8
Reaction score
0
Points
0
Location
Hamilton, Victoria
Members Ride
VF Evoke
I wired the inputs and outs right then wired the orange/blue wires to 12v and black/blue wires to ground but the amp won't turn on I've plugged the amp in to a mates statesman and it work fine so I have to be doing something wrong right hahaha I tested the fuse and it has power going through so I'm really confused now lol
 

Tasmaniak

Not a valid input....
Joined
Apr 30, 2005
Messages
8,094
Reaction score
126
Points
63
Age
38
Location
S.E. Melbourne
Website
www.ranjinstallations.com.au
Members Ride
VR Stato, C180 Kompressor, Prado and Ka
Well.... verify your mates wiring?!?
 
Top