Welcome to Just Commodores, a site specifically designed for all people who share the same passion as yourself.

New Posts Contact us

Just Commodores Forum Community

It takes just a moment to join our fantastic community

Register

Exhaust manifold gaskets, yay or nay?

SweetWagon

booosted
Joined
Jan 27, 2006
Messages
2,139
Reaction score
19
Points
38
Age
35
Location
Springwood NSW
Members Ride
VS Berlina Wagon Supercharged
Quick query,

Currently in process of doing two engine conversions L36 > L67 v6's.

Something im not sure about is the exhaust manifold gaskets. The motor im using was from a wrecker's it didnt have any exhaust on it but there were gaskets stuck to the heads still, the other motor purchased from a forum member still had the stock manifolds on it with no gaskets. Holden also say there is no exhaust manifold gaskets for these motors (L36 & L67).

As both motors are getting pacemaker extractors, should i source some gaskets or just bolt them on directly?

Cheers
 

Burnout124

Member
Joined
Jan 31, 2011
Messages
258
Reaction score
0
Points
16
Location
Western Australia
Members Ride
VY Executive S2/ VY SS 6sp
if you are going to have extractors thay seal better but with origanal manafolds i would not bother
 

Darren_L

Well-Known Member
Joined
May 2, 2009
Messages
1,872
Reaction score
72
Points
48
Location
Toowoomba, Qld
Members Ride
VH SS
some extractor/header manufacturers specify not to use gaskets.
That was the case with the Pacemakers I bought for my 304
I don't use gaskets, just a bit of high temp exhaust sealant and no leaks so far.
 

SweetWagon

booosted
Joined
Jan 27, 2006
Messages
2,139
Reaction score
19
Points
38
Age
35
Location
Springwood NSW
Members Ride
VS Berlina Wagon Supercharged
some extractor/header manufacturers specify not to use gaskets.
That was the case with the Pacemakers I bought for my 304
I don't use gaskets, just a bit of high temp exhaust sealant and no leaks so far.

Alright cheers might look into that
 

Brett_jjj

Well-Known Member
Joined
Oct 16, 2009
Messages
6,805
Reaction score
108
Points
48
Location
Tamworth NSW
Members Ride
vs commodore
The VSV6 gregorys workshop manual also says that no gaskets are used on the exhaust manifolds.Heres what it actually says :
" the manifold and cylinder head sealing surface must be in perfect condition as no gasket is used".
 
Last edited:
Top