Just Commodores Forum Community

It takes just a moment to join our fantastic community

Register

Exhuast Tips!

Discussion in 'VN - VP Holden Commodore (1988 - 1993)' started by SiLeNt-SoN, May 8, 2007.

  1. SiLeNt-SoN

    SiLeNt-SoN 2000 WH Statesman

    Messages:
    92
    Likes Received:
    0
    Trophy Points:
    0
    Joined:
    Sep 3, 2006
    Location:
    Brisbane
    Members Ride:
    2000 model WH statesman
    Hey all,

    Havent been on here in a while....

    I have a few question, i currently have a 2.5zorst and a 3inch tip, and was thinking if i just got a twin 3inch tip would it give it a better sound?

    Also any ideas on how much i can get my 2.5zorst split into 2 pipes about half way down and lead one to each side of the bumper, then stick 2 cannons on for the tips... I am mainly wondering the price to get the extra 2.5inche pipe welded on and run down the opposite side? or would i have to get m whole zorst done again?


    Any help or ideas welcome,


    Thanks dudes!!!!:thumbsup:
     
  2. Not_An_Abba_Fan

    Not_An_Abba_Fan Exhaust Guru

    Messages:
    13,813
    Likes Received:
    422
    Trophy Points:
    83
    Joined:
    Aug 18, 2006
    Location:
    Bunbury, WA
    Members Ride:
    Strange Rover
    A twin tip will make no difference to the sound.

    Can't run another pipe down the RHS because of the fuel tank.

    Cannons are for shooting at pirate ships, not for Commodores.
     
  3. Emackulation

    Emackulation Banned

    Messages:
    2,066
    Likes Received:
    29
    Trophy Points:
    0
    Joined:
    Apr 5, 2005
    Location:
    SE Queensland
    Members Ride:
    '92 HSV VP GTS
    HAhahahahahaah. Well said, well said.
     
  4. adam69

    adam69 Banned

    Messages:
    738
    Likes Received:
    9
    Trophy Points:
    0
    Joined:
    Oct 16, 2004
    Members Ride:
    VT Clubby
    What they said.
     
  5. S Pack

    S Pack Topped out @ 230kph

    Messages:
    224
    Likes Received:
    3
    Trophy Points:
    0
    Joined:
    Jul 11, 2005
    Location:
    Germany, Europe
    Members Ride:
    Mercedes E-Class 2007, E220 CDI Wagon
    Big cannons also look good on females (no offence to ladies in here)
     
  6. Emackulation

    Emackulation Banned

    Messages:
    2,066
    Likes Received:
    29
    Trophy Points:
    0
    Joined:
    Apr 5, 2005
    Location:
    SE Queensland
    Members Ride:
    '92 HSV VP GTS
    Hahahah, this thread is a crack up!
     
  7. Not_An_Abba_Fan

    Not_An_Abba_Fan Exhaust Guru

    Messages:
    13,813
    Likes Received:
    422
    Trophy Points:
    83
    Joined:
    Aug 18, 2006
    Location:
    Bunbury, WA
    Members Ride:
    Strange Rover
    I thought they were bazooka's.
     
  8. Emackulation

    Emackulation Banned

    Messages:
    2,066
    Likes Received:
    29
    Trophy Points:
    0
    Joined:
    Apr 5, 2005
    Location:
    SE Queensland
    Members Ride:
    '92 HSV VP GTS
    Babalons? Knockers? Rockets? Fun Bags? Milk wagons?
     
  9. caminsa

    caminsa Cam...mateeeeee

    Messages:
    34
    Likes Received:
    0
    Trophy Points:
    0
    Joined:
    Mar 26, 2007
    Location:
    Add-ladeee
    Members Ride:
    VG Ute
    i have extractors on my ute and a 2.5 inch exhaaust with a tip but it doesnt sound anything like ppl i know who have 2.5 inch exhaust , is there a way i can make it louder with out getting a whole new exhaust becoz atm it sounds so stock??
     
  10. JD

    JD Donating Member

    Messages:
    1,716
    Likes Received:
    25
    Trophy Points:
    0
    Joined:
    Aug 18, 2006
    Location:
    Deep South, SA
    Members Ride:
    1.6L Turbo Holden Croooooooooooze
    hi-flow cat's would make it a little louder i would think.

    you could also upgrade to a 3in system
     
  11. Not_An_Abba_Fan

    Not_An_Abba_Fan Exhaust Guru

    Messages:
    13,813
    Likes Received:
    422
    Trophy Points:
    83
    Joined:
    Aug 18, 2006
    Location:
    Bunbury, WA
    Members Ride:
    Strange Rover
    V6 or V8? Make sure the front muffler is a straight through design, and remove the rear resonator. Wouldn't bother with a hi flow cat though, it will make it louder but for $200+ it won't do your low end power or fuel economy any good.
     
  12. Burt_vn

    Burt_vn Back in the game

    Messages:
    105
    Likes Received:
    3
    Trophy Points:
    18
    Joined:
    Jan 16, 2007
    Location:
    Gold Coast
    Members Ride:
    VG V8 5spd, 400hp 5spd soarer, vq stato
    High flow cat - No.
    3 inch System - No.
    If you have a two muffler system, cut the end one off, if you have one muffler, cut it off. then weld some pipe on yourself to finish it, or if you want it done properly, get either a 2.5" zorst done with just one muffler, of get two high flowing mufflers. If you wanted it to be nice and loud, you shoulda told the exhaust man :thumbsup:
    BUT If you want really loud... My mate has extractors running into twin side pipes, one in front of each rear tyre on his vs ute.. No cats, no Mufflers...extractors into two seperate pipes..that are welded to his chassis, and yeah. come out both sides...
    Its ****ing stupid, and highly illegal. But oh dear lord does it sound tough. :p
     
  13. caminsa

    caminsa Cam...mateeeeee

    Messages:
    34
    Likes Received:
    0
    Trophy Points:
    0
    Joined:
    Mar 26, 2007
    Location:
    Add-ladeee
    Members Ride:
    VG Ute
    yer its v6, i dont wanna spend much money though .. would a muffler do anything?
     
  14. Not_An_Abba_Fan

    Not_An_Abba_Fan Exhaust Guru

    Messages:
    13,813
    Likes Received:
    422
    Trophy Points:
    83
    Joined:
    Aug 18, 2006
    Location:
    Bunbury, WA
    Members Ride:
    Strange Rover
    Just get the rear resonator cut off and a piece of straight pipe welded in.
     
  15. caminsa

    caminsa Cam...mateeeeee

    Messages:
    34
    Likes Received:
    0
    Trophy Points:
    0
    Joined:
    Mar 26, 2007
    Location:
    Add-ladeee
    Members Ride:
    VG Ute
    how much would that be do u rekon??
     
  16. Not_An_Abba_Fan

    Not_An_Abba_Fan Exhaust Guru

    Messages:
    13,813
    Likes Received:
    422
    Trophy Points:
    83
    Joined:
    Aug 18, 2006
    Location:
    Bunbury, WA
    Members Ride:
    Strange Rover
    Around $50 I would say.
     
  17. coolvxss

    coolvxss New Member

    Messages:
    718
    Likes Received:
    3
    Trophy Points:
    0
    Joined:
    Apr 29, 2006
    Location:
    canberra
    Members Ride:
    5sp VN Executive1988, VX SS 6sp
    Yeah costed me $45 cash to get my ressie cut off
     
  18. holdenrules

    holdenrules New Member

    Messages:
    142
    Likes Received:
    1
    Trophy Points:
    0
    Joined:
    Jan 11, 2005
    Location:
    VIC
    :rofl: :rofl: :rofl:
     
  19. caminsa

    caminsa Cam...mateeeeee

    Messages:
    34
    Likes Received:
    0
    Trophy Points:
    0
    Joined:
    Mar 26, 2007
    Location:
    Add-ladeee
    Members Ride:
    VG Ute
    yer sweet were can i get this done>
     
  20. coolvxss

    coolvxss New Member

    Messages:
    718
    Likes Received:
    3
    Trophy Points:
    0
    Joined:
    Apr 29, 2006
    Location:
    canberra
    Members Ride:
    5sp VN Executive1988, VX SS 6sp
    Any exhaust place
     

Share This Page