Welcome to Just Commodores, a site specifically designed for all people who share the same passion as yourself.

New Posts Contact us

Just Commodores Forum Community

It takes just a moment to join our fantastic community

Register

EYY's 95 VS Statesman

afstruct

Donating Member
Joined
Dec 10, 2015
Messages
1,678
Reaction score
2,655
Points
113
Location
Warners Bay
Members Ride
HSV VS Maloo , 2002 Monaro
Rotor looks good! id spray the rotors hub section and the caliper silver (like mine). black hides in the shadows and you dont notice the brake set up.

Agree, silver looks good , especially with silver wheels, is noticeable but doesn't stand out as a contrast . Did the same with mine resonatly when I rebuilt brakes.
 

Lex

Well-Known Member
Joined
Sep 19, 2012
Messages
5,753
Reaction score
5,000
Points
113
Location
Geelong Victoria
Members Ride
VT Executive S1 V6 6 speed Auto Wagon
Hi
I did mine blue & silver, when l rebuilt my brakes. I have a vt commodore wagon.
 

Attachments

  • 20180726_003918.jpg
    20180726_003918.jpg
    301.5 KB · Views: 312
  • 20180719_205356.jpg
    20180719_205356.jpg
    287.3 KB · Views: 334

afstruct

Donating Member
Joined
Dec 10, 2015
Messages
1,678
Reaction score
2,655
Points
113
Location
Warners Bay
Members Ride
HSV VS Maloo , 2002 Monaro
Hi
I did mine blue & silver, when l rebuilt my brakes. I have a vt commodore wagon.

That works with the silver/ polished wheels and white paint work.
Personally not so shore with EYY's paint work.
Looking at that second photo you did a superb job on them.
 

EYY

Well-Known Member
Joined
Mar 6, 2011
Messages
5,752
Reaction score
2,032
Points
113
Location
Vic
Members Ride
VS Statesman
My latest purchase came with a set of hpc coated pacies and a single 3” exhaust. They’ll be going on my daily stato very shortly along with the car back. The hsv headers have cracked again and the twin system has seen better days. Need to replace the steering rack again so will probably tackle the exhaust at the same time.

Down the track I’d like twin 2.5 or twin 3”. Id probably adapt a vt-vz catback and make my own cat pipes. But that’s a while away yet - too many other projects on the go currently.
 

someguy360

Well-Known Member
Joined
Jan 29, 2011
Messages
4,099
Reaction score
6,548
Points
113
Location
The Shed
Members Ride
Various
Good idea to do them while the rack is out, it's a nightmare otherwise.
 

someguy360

Well-Known Member
Joined
Jan 29, 2011
Messages
4,099
Reaction score
6,548
Points
113
Location
The Shed
Members Ride
Various
How did you go with it? Did you need to lift the engine at all or just move the rack out of the way?

I had to lift the engine from the drivers side about an inch, you can just undo the engine mount and raise it slightly and that should be enough.

I still had the rack in place, just dropped out it's mounts to lower it down so you might be ok, but worst case it's not too bad.
 
Top