253@7k
300rwhp supra. yay.
- Joined
- Apr 26, 2006
- Messages
- 998
- Reaction score
- 9
- Points
- 0
- Members Ride
- TT Supra/HZ Ute.
For Sale in Scarborough, Perth.
Worked 253
Re-built approx 70000kms ago.
Stock crank.
Stock Rods.
ACL pistons.
Big Crow cam.
Double row timing chain.
Anti pump up lifters.
Crane valve springs.
single plane manifold.
600 vac seconds holley with elec choke.
Alloy rocker covers.
Gilmer belt drive.
HQ/WB sump.
Tri Y extractors for HQ-WB.
Cam and lifters 15000km old.
Manifold and carby 8000km old.
GMB Water pump 5000km old.
Fast engine, revs well, still in my HZ will be removed after sale.
Happily revs to 6000 all day, makes power from 2800 up to the 6000 rev limit it was set on. I have removed the MSD dizzy for my next engine but it will come with a single point dizzy to keep it running.
Comes with a celica 5 speed gearbox which has a new clutch but also a slight clunk. Still works fine but would recommend looking at it.
Will come with spare 2bbl manifold and stromberg carby and other spares.
Anyone who wishes to come for a drive will be very impressed at what this motor can do.
I can separate if anyone is interested in any parts.
Any questions call 0417181991 or email [email protected]
looking for $1500 with gearbox or $1000 without. Or make me an offer.
Cheers, Steve.
Worked 253
Re-built approx 70000kms ago.
Stock crank.
Stock Rods.
ACL pistons.
Big Crow cam.
Double row timing chain.
Anti pump up lifters.
Crane valve springs.
single plane manifold.
600 vac seconds holley with elec choke.
Alloy rocker covers.
Gilmer belt drive.
HQ/WB sump.
Tri Y extractors for HQ-WB.
Cam and lifters 15000km old.
Manifold and carby 8000km old.
GMB Water pump 5000km old.
Fast engine, revs well, still in my HZ will be removed after sale.
Happily revs to 6000 all day, makes power from 2800 up to the 6000 rev limit it was set on. I have removed the MSD dizzy for my next engine but it will come with a single point dizzy to keep it running.
Comes with a celica 5 speed gearbox which has a new clutch but also a slight clunk. Still works fine but would recommend looking at it.
Will come with spare 2bbl manifold and stromberg carby and other spares.
Anyone who wishes to come for a drive will be very impressed at what this motor can do.
I can separate if anyone is interested in any parts.
Any questions call 0417181991 or email [email protected]
looking for $1500 with gearbox or $1000 without. Or make me an offer.
Cheers, Steve.
Last edited: