slowr8
New Member
- Joined
- Jun 30, 2005
- Messages
- 86
- Reaction score
- 0
- Points
- 0
- Members Ride
- vtII Clubsport M6
ITEM: Fully rebuilt LS1 & 4 spd Auto conversion. Items: Wiring loom, fully MafLess tuned 300kw computer, pedal box, selector tail-shaft.
LOCATION: Castle Hill, NSW
CONDITION: LS1 Fully rebuilt better than new condition. Auto has 23000ks.
PRICE: 5000 Neg / Make an offer
DELIVERY/PICK UP INFORMATION: pickup
PAYMENT OPTIONS: COD, Direct Deposit, Funds Transfer
CONTACT DETAILS: 0406 006 251
OTHER INFO:
This is the invoice from Hocking Racing Shop (www.hockingracingshop.net
· Remove motor from car and strip engine.
· Sent block away and had it chemically cleaned
· Sent heads away to be serviced and ported
· Supplied and fitted new flat top pistons and rings to suit
· Lightened crankshaft
· Supplied and fitted new bearings and gaskets to motor
· Supplied and fitted new cam shaft cam Clive cams 224 in 228 @ 50 dur hyd 273 lift 277
· Supplied and fitted new lifters to suit cam
· Fitted high volume oil pump to motor
· Fitted motor to vehicle
cost inc GST
$6000.00
· Remove manual gearbox
· Fit automatic transmission supplied by customer
· Supplied and fitted new tail shaft to suit automatic
Cost inc GST
$2000.00
TOTAL inc GST
$8000.00
This is the only info I have on it....all I know about it is that is goes very hard, and I've only just run in the engine then had it tuned. I'm pulling it out of the car tomorrow, and I want this gone pretty quickly so, grab a bargan!
LOCATION: Castle Hill, NSW
CONDITION: LS1 Fully rebuilt better than new condition. Auto has 23000ks.
PRICE: 5000 Neg / Make an offer
DELIVERY/PICK UP INFORMATION: pickup
PAYMENT OPTIONS: COD, Direct Deposit, Funds Transfer
CONTACT DETAILS: 0406 006 251
OTHER INFO:
This is the invoice from Hocking Racing Shop (www.hockingracingshop.net
· Remove motor from car and strip engine.
· Sent block away and had it chemically cleaned
· Sent heads away to be serviced and ported
· Supplied and fitted new flat top pistons and rings to suit
· Lightened crankshaft
· Supplied and fitted new bearings and gaskets to motor
· Supplied and fitted new cam shaft cam Clive cams 224 in 228 @ 50 dur hyd 273 lift 277
· Supplied and fitted new lifters to suit cam
· Fitted high volume oil pump to motor
· Fitted motor to vehicle
cost inc GST
$6000.00
· Remove manual gearbox
· Fit automatic transmission supplied by customer
· Supplied and fitted new tail shaft to suit automatic
Cost inc GST
$2000.00
TOTAL inc GST
$8000.00
This is the only info I have on it....all I know about it is that is goes very hard, and I've only just run in the engine then had it tuned. I'm pulling it out of the car tomorrow, and I want this gone pretty quickly so, grab a bargan!