Welcome to Just Commodores, a site specifically designed for all people who share the same passion as yourself.

New Posts Contact us

Just Commodores Forum Community

It takes just a moment to join our fantastic community

Register

facotory imoblizer help needed

macca69

macca
Joined
Jul 13, 2008
Messages
31
Reaction score
0
Points
0
Location
South east Queensland
Members Ride
Vr ute
The factory immobilizer in vr ute i want to disconnect it permanently so no more trouble!!! and then fit after market alarm system due to the age of the ute and we have had afew problems with it,ilke to keep things simple and its my wife's dailey driver its about to get custom paint and panel

ican take it to auto barn and they wil charge $300 to disable mobilizer permanently iam fairly handy at electrics and trying to save $$$$ to put good quilty after market alarm in it
 

Z2TT

Member
Joined
Dec 21, 2008
Messages
314
Reaction score
1
Points
18
Members Ride
VL Commodore
If it's the same as the VS, then :

The BCM disables earth to the starter relay, so what you can do is wire the earth wire for the starter relay
to constant power, if you do this at the starter relay itself it will bypass the Neutral Starter Switch, and that could be dangerous.
So to keep the neutral starter switch function, you must find the wire at the BCM by using a multimeter to test continuity for the earth
wire for the starter solenoid, with one prong on the starter solenoid earth wire (Should be Grey), and other prong to test all the wires going to the BCM.
Once you find the wire at the BCM Plugs, Just connect it to constant earth.

The second thing you must do is get somebody who knows how to, to disable the VATS routine on your ECU.
 

macca69

macca
Joined
Jul 13, 2008
Messages
31
Reaction score
0
Points
0
Location
South east Queensland
Members Ride
Vr ute
If it's the same as the VS, then :

The BCM disables earth to the starter relay, so what you can do is wire the earth wire for the starter relay
to constant power, if you do this at the starter relay itself it will bypass the Neutral Starter Switch, and that could be dangerous.
So to keep the neutral starter switch function, you must find the wire at the BCM by using a multimeter to test continuity for the earth
wire for the starter solenoid, with one prong on the starter solenoid earth wire (Should be Grey), and other prong to test all the wires going to the BCM.
Once you find the wire at the BCM Plugs, Just connect it to constant earth.

The second thing you must do is get somebody who knows how to, to disable the VATS routine on your ECU.

Thanx for that do you no any one in brisbane or logan city can thcan disable the vats at a reasonable price !!!
 

hako

Donating Member
Joined
Aug 1, 2004
Messages
8,020
Reaction score
89
Points
48
Age
78
Location
Toowoomba SE QLD
Members Ride
VS11 BT1 V6
The cheapest quickest and most reliable way to do what you want is to go to a wrecker and buy a BCM with the key - they usually go for around $100 and if you install a higher BCM you can then have electric windows etc if you want. You then detach the metal key from your old keyhead and put it on the new keyhead......then it fits the ignition and door keyholes.
 
Top