Welcome to Just Commodores, a site specifically designed for all people who share the same passion as yourself.

New Posts Contact us

Just Commodores Forum Community

It takes just a moment to join our fantastic community

Register

[SA] Factory commodore supercharger snout chrome!!

HARVZ-6

New Member
Joined
Nov 2, 2008
Messages
826
Reaction score
2
Points
0
Age
32
Location
Riverton sa
Members Ride
VT spac super6
As the title says guys..

iv got a snout off the factory charger thats been chrome dipped..

I just bought a fully polished charger and want my yellaterra snout so this one can go..

just needs a pully put on so a good opportunity to up boost aswell :thumbsup:

Done 50000ks since new.. told it was just rebuilt.. the oil was clean as so i dont doubt it


the snout is whats on the charger in these pics..
IMG_0638.jpg


IMG_0639.jpg


Just looking for offers currently.. swaps on parts for an l67 considered

will post


cheers
 

Macka21

New Member
Joined
Jan 3, 2009
Messages
282
Reaction score
0
Points
0
Location
Whyalla S.A
Members Ride
CAMMED VY SS Series 2 M6
hey mate i have a vy spac wats involved in me supercharging her if i bought this wat else am i in need of
 

HARVZ-6

New Member
Joined
Nov 2, 2008
Messages
826
Reaction score
2
Points
0
Age
32
Location
Riverton sa
Members Ride
VT spac super6
so you have just a stock ecotec?

ill be honest your better off getting a factory supercharged motor (l67) to start with..

the difference between that and an ecotec is basicaly the l67 has a stronger bottom end, different heads and lower compression ratio.. bigger injectors and the computer..

iv seen it done tho with an adapter plate to make the supercharger manifold fit the ecotec heads and a lowered compression ratio and tune

i will have my old charger on soon to sell.. the rotors teflon coating has worn off making it chatter a bit with loss of boost so recon rotors and itll be all sweet
 

redcv6

supercharged intercooled
Joined
Aug 21, 2006
Messages
532
Reaction score
5
Points
0
Location
Ringwood
Members Ride
vy ss ute, diesel landcruiser 100s, hq panel van
has the snout been shaved back for the pulley upgrade or is it stock?
 

HARVZ-6

New Member
Joined
Nov 2, 2008
Messages
826
Reaction score
2
Points
0
Age
32
Location
Riverton sa
Members Ride
VT spac super6
i can only assume so.. i didnt know they had to be?

but the guy was running 17-18psi with it so i would say so
 

vxcal

New Member
Joined
Nov 30, 2008
Messages
13
Reaction score
0
Points
0
Members Ride
vx calais
where did u get the charger polished? and what $ it cost?...

the snout dont have to be shaved either.. straight change over!
 

HARVZ-6

New Member
Joined
Nov 2, 2008
Messages
826
Reaction score
2
Points
0
Age
32
Location
Riverton sa
Members Ride
VT spac super6
wouldnt be able to tell you mate..

bought it like that.. he said it cost 450bucks to get done tho
 

Gav86

New Member
Joined
Nov 8, 2005
Messages
73
Reaction score
0
Points
0
Age
41
ya taking cash or just swaps?
 
Top