I the other night removed the setreo thinking that was required to access the loom to install a bluetooh car kit. As I found out its not needed, as a result I had trouble removing it and blew a the fuse on the back of the stereo. I replaced it and it powers back up.....but is unusable, screen lights up clock works but cant turn it on. I`m installing the car kit with the plu on the passenger side centre console. There is no ACC. power to the loom, constant is fine. I`m guessing the two are linked, I have checked the fuses and replaced, still no good. Any suggestions? Are there other fuses I should be looking for?
Make sure the stock headunit is pushed right back in, if its not it sometimes doesn't connect properly to the loom
