Fitting 19" Rims on a VP

[ducker85]

in SA its only legal to go up 2 sizes in rims according to ur tyre placard. For example if the placard says 205/65/15 you can legally only go up to 17" rims. But LOTS of people dont care and get 18s 19s etc

RETARDED SA LAWS

AN engineer's report along with an excemption letter from Transport SA and 20" are 100% mate, if done properly. I know Its_camo car is 100% legal in SA

Wow.. then i'll have NO wheel stud to play with

That's why Dad sold our's. With an 8 or 10mm spacer you will need longer wheel studs.

Also i made a mistake the VP International wheels are 35P not 28P i just pulled our's off n noticed then

 

[levymetal]

pretty sure stealthy summed this up in another thread:

/\ correcto, VP with IRS are the only one to have a different offset. Either use spacers/longer studs (i have this for my grange wheels) or do the simple fix of changing to VR onwards hubs (which is what will be on the cards when i can be bothered)

 

[ducker85]

Which basically is what I said depending on the offset you can work out how thick the spacer's need to be.