Welcome to Just Commodores, a site specifically designed for all people who share the same passion as yourself.

New Posts Contact us

Just Commodores Forum Community

It takes just a moment to join our fantastic community

Register

fitting interior moulding help please

kazalex

karen
Joined
Oct 24, 2008
Messages
192
Reaction score
1
Points
16
Location
adelaide
Members Ride
vy series 2,s pack
hi, going to fit interior 4mm moulding around my dash but i am not sure how to do the cornered areas, without it lifting off.
 

nyteshyft

Member
Joined
Jun 23, 2013
Messages
30
Reaction score
2
Points
8
Age
36
Location
Melbourne
Members Ride
2012 VE Series II Commodore Sportswagon
Is the molding stock or an aftermarket feature? Did it come with instructions? Did it come with glue?
 

uniacidz

Harden the Frak Up
Joined
Dec 13, 2011
Messages
2,267
Reaction score
181
Points
63
Location
Sideneee
Members Ride
VE Berlina
What is this moulding?

Got any pics/links?
 

Pollushon

Boost gives me a bar....
Joined
Nov 9, 2012
Messages
3,729
Reaction score
2,797
Points
113
Location
Canberra
Members Ride
VY SS
I'd suggest warmth on the bends (heatgun) the adhesive and the interior trim, however if the bends are severe, maybe consider cutting and angled butt joining. I'd also make sure the trim was really, really clean.

If this stuff isn't top quality though the heat treatment will eventually fail.
 

uniacidz

Harden the Frak Up
Joined
Dec 13, 2011
Messages
2,267
Reaction score
181
Points
63
Location
Sideneee
Members Ride
VE Berlina
Yeh agree with above.

Heatgun/hot hair dryer works wonders with vinyl wrapping.

Might be best to warm the surface which applying to as well for better adhesion
 
Top