I've done a search and can't find anything. Does anyone know an easier way of fitting them than taking the inner guard out?
If they are the oval shaped ones from Holden then will be 2 little dag like things on the underside of the indicator that prevents them from clipping in to the original rectangle hole in the guard. You will need to shave these dags down and they will click right in. I have them on my VS and after clipping off those dags and installing them they are in there strongly and havent moved in hundreds of k's so far. Hope this helps, we had to do some thinking to get them in as well and it worked for my ride.
What the... take the guard out?. http://forums.justcommodores.com.au...-s/4156-installing-clear-side-indicators.html
Not sure why you need to shave anything off,they fit nice and snug straight up.the loop bit goes in first,theres a small gap between the loop and back of the blinker which fits onto the guard,from there the rest can be pushed in
As Shanhsv said they do fit in nice and easy as i did it on the weekend myself to my vr, although i had to put them in back to front to the ones i pulled out (so the piece where the wire plug is angles to the back of the car and not the front) Hope this helps
