Fitting VZ front suspension into VXII

[harrop.senator]

Fronts are 180-230 lbs/inch
Rears 360-440 lbs/inch

Couldn't find the fe2 to compare.

I can't find the away bar sizes for a vz sv6 if your V8 is an ss it should have a 27mm front. 16mm rear.

The hsv fronts are a 28mm and so is the vz Monaro. Price of those probably more then an aftermarket sway bar though.

Vt V8 fe2 is 17mm so can be a cheap upgrade if you can find one.

Sorry I wasn't that helpful , without the vz sway bar sizes and the fe2 spring rates it's hard to do a good comparison.

 

[MiKExAUS]

Fronts are 180-230 lbs/inch
Rears 360-440 lbs/inch

Couldn't find the fe2 to compare.

I can't find the away bar sizes for a vz sv6 if your V8 is an ss it should have a 27mm front. 16mm rear.

The hsv fronts are a 28mm and so is the vz Monaro. Price of those probably more then an aftermarket sway bar though.

Vt V8 fe2 is 17mm so can be a cheap upgrade if you can find one.

Sorry I wasn't that helpful , without the vz sway bar sizes and the fe2 spring rates it's hard to do a good comparison.

Not at all. Appreciate sharing your data. Thank you. Surprised they went backwards with vx2 rear swaybar? As in from 17 to 16mm

 

[harrop.senator]

 

[harrop.senator]

I'd say it was to counteract the boat anchor 5 litres tendency to understeer.