Flick High beams on everything dies

[Scido]

Hi
Wanting some help here for my VQ.
Last night i went to flick on my high beams and when i did i lost all my lights including the dash and the highs didnt come on at all.
Then i pulled the lever towards me to flash them on and i lost them again but the dash lights stayed on.

Help? or take it to an out sparky?

 

[Dum*P*ster]

Chances are a Wire has become or is close to shittin itself.. Check your wires behind you Cluster.. There on C1 C2 & C3 They are White Plugs, simply pull em towards you and they will pop out.. And you can inspect each wire

OR.. your fuse may be close to dying aswell.. Look under your Fuse Pannel (Located Under the steering wheel) and check the fuse that's supposed to help for P/Lamp I believe it is

 

[Scido]

Chances are a Wire has become or is close to shittin itself.. Check your wires behind you Cluster.. There on C1 C2 & C3 They are White Plugs, simply pull em towards you and they will pop out.. And you can inspect each wire

OR.. your fuse may be close to dying aswell.. Look under your Fuse Pannel (Located Under the steering wheel) and check the fuse that's supposed to help for P/Lamp I believe it is

Thanks mate ill rip the cluster out and check my fuses tonight but do you mean check each wire with the multimeter or will those wires show visble damage?
Hopefully its just the fuse lol

 

[Shearer]

Bad battery terminals can cause this, ei: low voltage.

 

[Scido]

Bad battery terminals can cause this, ei: low voltage.

Well my battery did go flat on Saturday night :O

 

[Dum*P*ster]

Ooohh. Then that may be your prob


And for the wires.. First look for Visable damage ... then Multi-meter

 

[Scido]

Cheers guys

 

[Dum*P*ster]

Tell us how ya go tho

 

[Scido]

Yeah will do mate

 

[Shortstuff]

You could also check the high beam fuse (30amp) and relay under the bonnet. I blew the high beam fuse in my VN and it did the same thing.