Welcome to Just Commodores, a site specifically designed for all people who share the same passion as yourself.

New Posts Contact us

Just Commodores Forum Community

It takes just a moment to join our fantastic community

Register

Front end out of place

berlina95

New Member
Joined
Sep 19, 2010
Messages
9
Reaction score
0
Points
0
Location
Victoria
Members Ride
VS
Hey guys, last week i smashed my VS but not badly
The radiator support panel has been dinted near where the light connects and this is making it out of place by about 1cm. My new bonnet is missing the hole because it has been pulled out of place because of this dint. Panel beater says he needs to replace the hole support panel but i don't want to. Any ideas what to do?
14j92d3.jpg
 

ari666

250,000 hits
Joined
Mar 10, 2009
Messages
11,835
Reaction score
128
Points
63
Location
melbourne
Members Ride
1966 impala, R32 GTR

berlina95

New Member
Joined
Sep 19, 2010
Messages
9
Reaction score
0
Points
0
Location
Victoria
Members Ride
VS
ok thanks and how much should i be looking to pay to get it replaced and fitted?
 

MR_RX3

New Member
Joined
Oct 2, 2005
Messages
31
Reaction score
0
Points
0
Age
42
Location
Wollongong n.s.w
Members Ride
VR - V6 BT1
Mate a goos shop should be able to either Pull that out of give it nice touch with slide hammer and pull it out then just a small repair and paint

if so should be lookin around $300 - 400 mark i would say ( but also hard to say just from pic )
 

Mbro

New Member
Joined
Nov 6, 2010
Messages
107
Reaction score
1
Points
0
Age
32
Location
melb
Members Ride
VS statesman
it will never be the same if you slide hammer it out. replace the whole thing, it will cost a fair bit but it will be much worth it......

all your gaps will be **** if u slide hammer it out.

im a beater and i know that replacing it would be the best way to go
 

vyss manual

New Member
Joined
Jun 26, 2011
Messages
21
Reaction score
0
Points
0
Location
vic
Members Ride
vy ss manual
haha 300 to 400 what dodgy panel shop you taking it to lol im a beater and 1000 minimum for repair and 2000 replace
 
Top