Just Commodores Forum Community

It takes just a moment to join our fantastic community

Register

FS - Intercooled CRS SC14 Supercharger parts

Discussion in 'Parts And Other Items For Sale' started by stocky, Aug 27, 2008.

  1. stocky

    stocky New Member

    Messages:
    5,036
    Likes Received:
    79
    Trophy Points:
    0
    Joined:
    Jun 14, 2005
    Location:
    Melbourne
    Members Ride:
    1995 HSV Clubsport T5, 1991 VN Berlina
    Here is the updated list with prices for some parts. I still have to remove a few brackets from the car, but that will be done soon. if parts dont sell here, they will go on ebay. will be advertised in other places.

    Prices
    -3 PSI CRS kit (t/b after charger. missing one mount. easy to make but still works fine without) - $850
    • sc14 supercharger
    • belt
    • brackets
    • piping
    • leads
    • pod filter or modified airbox
    • 1 bar eprom tune, possibly memcal
    -9 psi pulley - $200
    -Intercooler - pSOLD
    -manifolds to move t/b before blower, with kick down/accel cables and bracket -$350
    -2 bar map sensor, 2 bar eprom tune, possibly memcal - $80
    -intercooler piping with silicone and clamps, suited for 300x600 intercooler with 3 inch ends - $500
    -39lb/hr injectors x6 - $300


    also for sale soon
    -complete v6 exhaust. genie headers, HM headers twin cat 2 1/4 exhaust, chrome twin tips (catback RRP $850, used for 3 months from new) $700
     
    Last edited: Oct 9, 2008
  2. Wagon_Wheel

    Wagon_Wheel Drop A Patch....

    Messages:
    1,589
    Likes Received:
    23
    Trophy Points:
    0
    Joined:
    Aug 17, 2005
    Location:
    Mt Martha, Vic
    Members Ride:
    Blown VS Clubsport, VP Wagon Daily
    :( im guessing you only have 6 injectors not 8??? lol
     
  3. stocky

    stocky New Member

    Messages:
    5,036
    Likes Received:
    79
    Trophy Points:
    0
    Joined:
    Jun 14, 2005
    Location:
    Melbourne
    Members Ride:
    1995 HSV Clubsport T5, 1991 VN Berlina
    yeah only 6 lol
     
  4. azkwazere

    azkwazere Ahhh Yes, Ahhh Yes....

    Messages:
    1,813
    Likes Received:
    38
    Trophy Points:
    0
    Joined:
    May 30, 2005
    Location:
    .....SE Burbs
    Members Ride:
    VP 5-SPD / 24-SPD Racer Hybrid
    interested in...

    -SC14 supercharger
    -Brackets to mount the charger
    -39lb/hr injectors
    -extended leads
    -non intercooler piping + BOV
    -3 psi pulley
    -tune

    for now...

    aZk.
     
  5. SK8SMN

    SK8SMN New Member

    Messages:
    8
    Likes Received:
    0
    Trophy Points:
    0
    Joined:
    Dec 29, 2007
    Location:
    west melb
    Members Ride:
    97 HSV L67 Statesman
    450 for the blower
     
  6. needwork2-4fillhabbit

    needwork2-4fillhabbit New Member

    Messages:
    1,029
    Likes Received:
    13
    Trophy Points:
    0
    Joined:
    Jan 28, 2008
    Members Ride:
    VN S1
    I want the kickdown and accelerator cables!!
     
  7. vn calais manual

    vn calais manual New Member

    Messages:
    785
    Likes Received:
    2
    Trophy Points:
    0
    Joined:
    Jun 22, 2005
    Members Ride:
    vn calais, vs clubsport #137
    im after the manifolds to move the throttle body, and the manifold adapting your flange on bower to piping for the intercooler, just the first peice. pm me.
     
  8. Abrowne70

    Abrowne70 New Member

    Messages:
    456
    Likes Received:
    4
    Trophy Points:
    0
    Joined:
    May 15, 2008
    Location:
    Down South, Adelaide
    Members Ride:
    VP Executive S2, VL 5sp Berlina Wagon
    could be interested in it all, price for the lot?
     
  9. stocky

    stocky New Member

    Messages:
    5,036
    Likes Received:
    79
    Trophy Points:
    0
    Joined:
    Jun 14, 2005
    Location:
    Melbourne
    Members Ride:
    1995 HSV Clubsport T5, 1991 VN Berlina
    but then the rest of the piping is pretty much worthless.

    will let you know when ive worked it all out
     
  10. DF3CTV

    DF3CTV New Member

    Messages:
    2
    Likes Received:
    0
    Trophy Points:
    0
    Joined:
    Aug 28, 2008
    Members Ride:
    VN V6 manual
    oh, looks like im a bit to late. :(
    im chasing
    -manifolds to move throttle body + accelerator cable
    -2 bar map sensor + tune
    -39lb/hr injectors
    trying to upgrade charger/ get it goin. eithen if u could point me in the right direction of distrubuters of these items would be a huge help!
    thanks
     
  11. stocky

    stocky New Member

    Messages:
    5,036
    Likes Received:
    79
    Trophy Points:
    0
    Joined:
    Jun 14, 2005
    Location:
    Melbourne
    Members Ride:
    1995 HSV Clubsport T5, 1991 VN Berlina
    no youre not late. all the parts are still on my car, but its not going into 3rd gear, so its stuck at my gf's place until i can get it home and get all these parts off it. ill get some prices up soon.
     
  12. Abrowne70

    Abrowne70 New Member

    Messages:
    456
    Likes Received:
    4
    Trophy Points:
    0
    Joined:
    May 15, 2008
    Location:
    Down South, Adelaide
    Members Ride:
    VP Executive S2, VL 5sp Berlina Wagon
    alright mate, let me know as soon as youve worked out how much you want for the whole lot, also what power was this putting out on your motor?
     
  13. nori

    nori New Member

    Messages:
    33
    Likes Received:
    0
    Trophy Points:
    0
    Joined:
    Jan 23, 2007
    Members Ride:
    VP SS s2
    where u located, how much for the whole lot?
     
  14. vn calais manual

    vn calais manual New Member

    Messages:
    785
    Likes Received:
    2
    Trophy Points:
    0
    Joined:
    Jun 22, 2005
    Members Ride:
    vn calais, vs clubsport #137
    how much would u want for all the intercooler piping n the manifolds to move the t.b. prety much it all minus the cooler itself?
     
  15. FATMAT

    FATMAT New Member

    Messages:
    171
    Likes Received:
    2
    Trophy Points:
    0
    Joined:
    Apr 23, 2008
    Location:
    Coffs Harbour
    Members Ride:
    VT V6
    No rush, just let me know what you want for the injectors when your ready mate :)
    Oh, let me know what you want for the mounting brackets too.
     
  16. stocky

    stocky New Member

    Messages:
    5,036
    Likes Received:
    79
    Trophy Points:
    0
    Joined:
    Jun 14, 2005
    Location:
    Melbourne
    Members Ride:
    1995 HSV Clubsport T5, 1991 VN Berlina
    ok the charger is off my car now and will be ready for sale soon. i will have prices up as soon as i work out what theyre worth. give me a few days.
    theres a small issue with the cooler piping though. for my piping to work, it will require a modified idler pulley bracket. this involves lowering the idle pulley down an inch or so? otherwise the piping wont fit due to that pulley getting in the way. it wouldnt be hard to modify your brackets, or you can buy my whole setup and not have an issue. they are good pipes though. 3 pieces, so not many silicone joins, and painted in pacemaker blue with a few scratches.
     
  17. vn calais manual

    vn calais manual New Member

    Messages:
    785
    Likes Received:
    2
    Trophy Points:
    0
    Joined:
    Jun 22, 2005
    Members Ride:
    vn calais, vs clubsport #137
    im not runing that second idler pulley anyway so i should be rite, shoot me a pm when ur ready :)
     
  18. Abrowne70

    Abrowne70 New Member

    Messages:
    456
    Likes Received:
    4
    Trophy Points:
    0
    Joined:
    May 15, 2008
    Location:
    Down South, Adelaide
    Members Ride:
    VP Executive S2, VL 5sp Berlina Wagon
    yeah still interested mate, just let me know when ur ready to sell the lot.
     
  19. stocky

    stocky New Member

    Messages:
    5,036
    Likes Received:
    79
    Trophy Points:
    0
    Joined:
    Jun 14, 2005
    Location:
    Melbourne
    Members Ride:
    1995 HSV Clubsport T5, 1991 VN Berlina
    update. prices are up
     
  20. vn calais manual

    vn calais manual New Member

    Messages:
    785
    Likes Received:
    2
    Trophy Points:
    0
    Joined:
    Jun 22, 2005
    Members Ride:
    vn calais, vs clubsport #137
    would u take 750 for the intercooler piping and the brakets to move the tb?

    shoot me a pm.
     

Share This Page