Welcome to Just Commodores, a site specifically designed for all people who share the same passion as yourself.

New Posts Contact us

Just Commodores Forum Community

It takes just a moment to join our fantastic community

Register

[VIC] Fs: Lumpy ecotech cam

taztassio

Member
Joined
Nov 29, 2007
Messages
297
Reaction score
0
Points
16
Members Ride
VY S L67
Hey,

I have a BRAND NEW BILLET CAM TECH cam, specs as shown:

Advertised duration: 290in/290ex
duration at 0.050": 229in/229ex
Lift at Cam: 332"in/332"out
LSA: 110
intake centreline: 108

For stock heads this will need modified retainers, as its about 532" lift in and out.

Located glenwaverley, will post.

$550 no lower

(cost of grinding this custom cam was $550, and the cost of the billet ontop was more).

This will idle rough, and produce some mean top end power.
 
Last edited:

H1GHROLLR

CHEMICALLY SUPERCHARGED
Joined
Feb 18, 2009
Messages
744
Reaction score
2
Points
0
Location
ROCKINGHAM,PERTH
Members Ride
VX CLUBSPORT R8 LS1
thats not a very lumpy cam the LSA:110 is very very tame
 

greenfoam

New Member
Joined
Jan 13, 2005
Messages
7,900
Reaction score
125
Points
0
Age
99
Members Ride
VP Executive R-spec
In a ls1 maybe.... but that's getting right up there for the V6's it would be VERY grumpy at idle
 

chargedvx6

Active Member
Joined
Dec 9, 2006
Messages
1,866
Reaction score
15
Points
38
Members Ride
VY SII HBD Calais L67
thats not a very lumpy cam the LSA:110 is very very tame

Yeah the LSA is 110 but did you check the duration? 230? Great top end from this thing if it's tuned right
 

taztassio

Member
Joined
Nov 29, 2007
Messages
297
Reaction score
0
Points
16
Members Ride
VY S L67
ahah this is NOT a tamed ecotech cam.

call camtech yourself. this is a CUSTOM GRIND, for 3-5000 rpm, rough idle. its all written on teh card.


you can do the cam yourself, but it would be in the range of $400-$800 to get installed.

This will produce some MEAN power for someone serious about their ecotec.

to give you an idea, stage 3 intense cam has specs as follows

CAM-363 - INTENSE™ Stage 3 Normally Aspirated Cam, duration @ .050": 222º/230º, lobe lifts: .339"/.331", valve lifts with 1.60:1 rocker arms: .542"/.529", lobe separation angle: 110º, intake centerline: 106º

This cam as MORE intake duration, and very similar lift

here is a vid of a STAGE 2 in a car in the US with a reasonable size exhaust
http://www.intense-racing.com/video/WesCamMov.mpg
 

delcowizzid

on holiday
Joined
Jul 8, 2008
Messages
6,989
Reaction score
431
Points
83
Location
NZ
Members Ride
в∞ѕтεכ √&
the ramp rate of the lobes has a lot too do with it to and just looking at that cam sitting there it has a fast ramp rate be nice and choppy i bet. very nice looking new billit too
 

taztassio

Member
Joined
Nov 29, 2007
Messages
297
Reaction score
0
Points
16
Members Ride
VY S L67
delcowizzid hit the nail on the head.

this is why i posted a picture, so people SERIOUS about ecotec power will get a good idea
 

17UCK!

New Member
Joined
Sep 11, 2008
Messages
272
Reaction score
1
Points
0
Members Ride
vs III commodore ute
i would totaly buy this but ive already put 1.95 rockers on :( sounds sick tho
 
Top