Welcome to Just Commodores, a site specifically designed for all people who share the same passion as yourself.

New Posts Contact us

Just Commodores Forum Community

It takes just a moment to join our fantastic community

Register

Gauge power

MRVX2U

New Member
Joined
Feb 21, 2011
Messages
47
Reaction score
0
Points
0
Location
Queanbeyan
Members Ride
VX S
I have just got myself 3 new gauges volts, water temp and oil pressure. I have the ground sorted and the sensors figured out but i just want to know where i should put the power wire. I read somewhere that the volts should be as close to the battery as possible but cant figure out where to put it, i just want to put them all together on the one point.
 

MRVX2U

New Member
Joined
Feb 21, 2011
Messages
47
Reaction score
0
Points
0
Location
Queanbeyan
Members Ride
VX S
Thanks heaps axemurderer101 I got into the rear wiper relay (have a sedan with no rear wiper but the relay is powered). I have put the water temp sensor into the top radiator pipe but it keeps reading wrong. I have found the temp sender near the thermostat housing but need to know how to tap into that to run my gauge off it with the standard ones still going. Is it safe to cut the power wire and solder it back together with the gauge wire.
 
Top