[QLD] GETRAG Manual conversion for VS,VT,VU,VX,VY Ecotec

[uNEEk]

ITEM: full getrag manual conversion for ecotec commodore.

LOCATION: QLD,Bowen

CONDITION: Used, with lots of new parts

PRICE: Make me a good offer.

DELIVERY/PICK UP INFORMATION: prefer pick up, will freight at your expense

PAYMENT OPTIONS: Direct Deposit, Cash

CONTACT DETAILS: Email, PM

OTHER INFO:

Complete vt/vx/vu manual conversion including all parts needed.
Incl. Gearbox, shifter linkages, shifter/mount plate, clutch master/slave & resevoir. Clutch pedal assembly. NPC Solid flywheel worth $450 alone with only 10,000 ks. Clutch/pressure plate to suit with 10,000ks aswell. Full Tailhaft setup from a VU ute. VU manual ECU (very rare!)

1 x set of brand new manual hbd hsv alloy Pedals paid $180.
1 x custom red leather shifter boot with hsv alloy gear knob paid $150
1 x set of wiring and instructions to convert auto loom to manual.
1 x custom programmed VT manual memcal for Approx 15-17kw gain over stock memcal. paid $80

Basically everything to turn your boring auto commy into a 5 speed.

I will list More parts that i have forgotten after. I have spent way too much getting all the parts ready for my conversion. so i need to sell it now as i am getting rid of the car.

I will consider reasonable offers only, no ridiculous offers. And am open to swaps let me know what you got.

PICTURES: Coming Soon

 

[uNEEk]

Bump make me an offer, will swap..

 

[vtspeed]

hey mate do have a rough gauge on what you are chasing for it?

 

[uNEEk]

Im chasing around 1100 mate, seems just the conversion cost me 700 and i had to buy solid flywheel, clutch, custom shifter setup, performance chip for VT, HSV alloy pedals etc. will swap + cash etc. or sell for less without some bits, if it doesn't sell ill split it up and sell as parts cheers

 

[SuperSixty6]

Not a bad price actually, Interesting you got a VT chip for a VU manual PCM. Didn't they change the computers in VX / VU and the memcal chip doesn't suit?

 

[uNEEk]

nah mate sorry, i must have mucked up, i bought the conversion off a VU ute so it has the Manual VU PCM, Tailshaft etc., But i wanted to put it in my VT so i had to buy a Memcal Peformance chip for the Manual conversion. It just Plugs into your stock auto ECU to change it to all manual settings + extra 15-17kw

 

[uNEEk]

bump cmon need it gone

 

[uNEEk]

bump.................

 

[uNEEk]

anyone keen? considering the amount of money spent???!! if it does not sell i will split it all up and sell as parts..

 

[skotlar]

anyone keen? considering the amount of money spent???!! if it does not sell i will split it all up and sell as parts..

Mate, if you do split it up let me know and a price as i'm trying to chase a solid mass flywheel asap for when I put a new clutch in my VU shortly.