Newbie1991
Member
- Joined
- Dec 31, 2014
- Messages
- 83
- Reaction score
- 0
- Points
- 6
- Location
- New South Wales
- Members Ride
- VP Executive V6 3.8,VP Exceutive S2 3.8L 5speed
Hey guys I managed to swap the green circuit board from the VP lv1 on the back of the vs lv2 and the tacho and Speedo work just not the fuel and temp gauges I drilled the holes out scrapped the holes so the Cooper shows for the nut and washer to touch but the fuel and temp gauges won't work any help or advice would be much appreciated thanks in advance
PS the only things I didn't do was swap the small circuit board inside and cover holes that aren't needed now would this be my problem
PS the only things I didn't do was swap the small circuit board inside and cover holes that aren't needed now would this be my problem