Already had about 8 L of engine oil but Repco has an EOFY sale
So I think I might be right for awhile !!!!!
So a couple months ago found this guy making copies of the STARR airbox.
Ordered one a couple of weeks ago.
It turned up this arvo.
So pretty much looks like I'll end up going the STARR stuff with the 355 build.
Yes it's limiting but is going to be a street car /cruiser.
Might do the drags a few times for fun and see how it/me goes.
Am leaning towards overkill on the bottom end so can step up top end if want.
Anyway the manifold I have heard of a guy/business in VIC that does extrude honing $1k plus postage =fxxxk.
Am contemplating cut base off , port runners and then get welded back up ( I don't think my TIG would cope and I'd rather pay ).
Get it ceramic coated , make a steel oil splash tray ( hoping you can seal so no oil gets to the bottom of the manifold and can then stick one of these heat blankets to the under side of the manifold.
Anyway =the airbox wasn't cheap , seems pretty good quality.
He only primed it and left the clips off as I'm undecided but leaning towards painting the lid in the Maloos body colour.
I do have a question ? as there's no mounting holes for the box itself and it can't just sit there.
Hoping
@EYY chimes in , I'm sure I've read where he has a genuine one.