Welcome to Just Commodores, a site specifically designed for all people who share the same passion as yourself.

New Posts Contact us

Just Commodores Forum Community

It takes just a moment to join our fantastic community

Register

harmonic balancer and crank angle sensor for vp s2 (same as s1?)

icePiK

New Member
Joined
May 23, 2009
Messages
3
Reaction score
0
Points
0
Members Ride
VN Commodore (S2)
hey i was just wondering if the harmonic balancer and the crank angle sensor are the same on the vp series 1 and the vp series 2. i have a vp sitting around that needs these peices and i have a mate wrecking a vp who has those peices but off a series one. if i was to grab the harmonic ballancer and the crank angle sensor from the vp series 1, cud i throw them on the vp series 2 engine?

please any help would be appreciated. thanks

-icePiK :bang:
 

rob drag racer

vn vp drag nut
Joined
Jun 30, 2008
Messages
662
Reaction score
1
Points
0
Location
golden beach
Website
forums.justcommodores.com.au
Members Ride
vp 3.8 with gas new project vn s1 guted strip only
yes providing you have the matching pair it will be fine that is to say it will fit and run just dont forget later down the track
 

icePiK

New Member
Joined
May 23, 2009
Messages
3
Reaction score
0
Points
0
Members Ride
VN Commodore (S2)
ey rob, ta for the help. your tellin me to remember that the harmonic/crankangle set is for a s1, so dont replace with the original? (s2) say if we did another harmonic ballancer, replace with a s1 harmonic because the sensor is s1?
 

*VN88*

New Member
Joined
Aug 30, 2007
Messages
23
Reaction score
2
Points
0
Location
Adelaide SA
Members Ride
VN Ex V6S1 man/VX Acc l67/VT Ex wag
yes all interchangable VN through to Vr
 
Top