hemi01
New Member
- Joined
- Apr 1, 2007
- Messages
- 68
- Reaction score
- 1
- Points
- 0
- Members Ride
- VN S2 V6 Berlina
I've searched the forums and can't really find any detail on a suitable Puller to remove the HB on my VN V6 series 2.
The retaining nut is off and I can see 3 slots on the face of the balancer. Is there a thread inside these slots? If so is this a suitable mount for the puller? Anyone know what size thread and length of bolts?
Someone suggested to bolt a plate over the cracked pully bolt then wind the bolt out against the plate thus pushing the balancer off the crankshaft.
Have others used a 3 claw puller grabbing the balancer over its edge?
The retaining nut is off and I can see 3 slots on the face of the balancer. Is there a thread inside these slots? If so is this a suitable mount for the puller? Anyone know what size thread and length of bolts?
Someone suggested to bolt a plate over the cracked pully bolt then wind the bolt out against the plate thus pushing the balancer off the crankshaft.
Have others used a 3 claw puller grabbing the balancer over its edge?