Does anyone one have any tips for replacing the front heater tap on a VL 3.0
Mine has rustd out so it was leaking coolant.
This is the one just behind the water pump and also has a connector to the manifold (I guess to use water to heat or cool it)
Looking at it unless it is a bash in job (an no room to swing anything), you need to remove at least the engine mount to allow it to screw in.
I have cut off the manifold tap and connected only the heater hose - any idea what imact this might have on the manifold given the water will now not circulate (I plugged the pipe up tp get the car going again)
regards
Mark