one_happy_panda
New Member
- Joined
- Jun 16, 2019
- Messages
- 3
- Reaction score
- 0
- Points
- 1
- Age
- 25
- Location
- Melbourne
- Members Ride
- VX V6
Hi,
Diaphragm in my heater tap was faulty, so I replaced the tap with a new one. The valve is working as it should with vacuum, but no heat is getting to the other side of the tap. So the valve will be in the hot position, the hoses on the engine side are hot, but the hoses on the other side of the tap stay cold.
Any ideas on what could cause this and how to fix it?
Thanks in advance
Diaphragm in my heater tap was faulty, so I replaced the tap with a new one. The valve is working as it should with vacuum, but no heat is getting to the other side of the tap. So the valve will be in the hot position, the hoses on the engine side are hot, but the hoses on the other side of the tap stay cold.
Any ideas on what could cause this and how to fix it?
Thanks in advance