Welcome to Just Commodores, a site specifically designed for all people who share the same passion as yourself.

New Posts Contact us

Just Commodores Forum Community

It takes just a moment to join our fantastic community

Register

HELP ASAP with pedal box!!

georgeonboost

clutch it!
Joined
Jun 14, 2005
Messages
555
Reaction score
4
Points
0
Location
Melb SE Suburbs
Members Ride
slammed VP EXEC
guys, i need help with my manual conversion, in particular the pedal box. its all in no worries but the pin at the top that the booster rod goes onto doesnt have a hole in it for the pin like the auto pedal box did. what can i put there so it doesn't move and slide off? there is like an indentation part at the end. is there like a clip thats meant to go there?

by the way im refering to this pin hole

15062008001copy.jpg

15062008002copy.jpg
 

delcowizzid

on holiday
Joined
Jul 8, 2008
Messages
6,988
Reaction score
445
Points
83
Location
NZ
Members Ride
в∞ѕтεכ √&
it should have c shaped clip on there
 

maldotcom2

New Member
Joined
Dec 11, 2008
Messages
1,035
Reaction score
2
Points
0
Members Ride
Cammed mafless VS Calais 5-speed.
If there's a groove all the way around it takes a clip, if there's just a hole straight through just use a split pin like i did. Varies depending on model.
 

Morton

For external use only
Joined
May 20, 2006
Messages
4,097
Reaction score
84
Points
0
Age
36
Location
Melbourne
Members Ride
Fairstar the Funship
Wow, I've not seen a booster knuckle that used a cotter pin before. How unusual! :D
 
Top