Welcome to Just Commodores, a site specifically designed for all people who share the same passion as yourself.

New Posts Contact us

Just Commodores Forum Community

It takes just a moment to join our fantastic community

Register

Help needed with engine swap

h8tensv6

Active Member
Joined
Dec 7, 2015
Messages
202
Reaction score
80
Points
28
Location
Newcastle NSW
Members Ride
2009 SV6 2002 VX 1989 VN 5 Litre
Hey guys im posting this for my brother that’s doing the swap.

Hey people im looking for some help, Iv put a known running 3.6 10h9h engine from 1/07 4wd auto, into a 9/07 2wd manual, that originally had a 10h9e in it, and it wont run.
I can crank it over and over without generating any error codes, if i disconnect the cam sensor it will start, rev to 4 grand and shut down, and generate a code for cam sensor fault, plug it back up and wont start......
i was told to swap the cam reluctors of the original motor onto this one, read they should prise off the gear, but i cant get them off, I have belted the **** out of them but no luck. Is my only option to remove the gears and swap them over. Anyone have any ideas, cheers......
 

_R_J_K_

Well-Known Member
Joined
Dec 20, 2008
Messages
6,723
Reaction score
1,856
Points
113
Members Ride
Zenki S14
Just swap the cam sensors themselves. You may also have to swap the crank angle sensor too.
 
Top