VXCOMMONWHORE
New Member
- Joined
- Jul 31, 2011
- Messages
- 15
- Reaction score
- 0
- Points
- 0
- Location
- Melbourne
- Members Ride
- Vx series II
Hi Guys, i recently just got a hold of some VT SS seats and door trims and also electric window regs and switches for my car (VX series 2 exec)
My question for you guys as ive looked on forums for the past week and my questions really havnt be answered is as follows
My BCM is only a LOW but i have the centre console harness for the windows and all the relay spots aswell, from what ive read i can bypass the BCM so the front drivers window will go up. cause the BCM controls the auto function of the window is this correct??
Also the seats i have are full electric both fronts, do you know if i have to change the BCM to suit the seats or can i just simply wire up the drivers seat with the existing wiring and some how piggy back the passenger side?? or would the wiring be in the door runners or foot well
Thanks in advance
Chris
My question for you guys as ive looked on forums for the past week and my questions really havnt be answered is as follows
My BCM is only a LOW but i have the centre console harness for the windows and all the relay spots aswell, from what ive read i can bypass the BCM so the front drivers window will go up. cause the BCM controls the auto function of the window is this correct??
Also the seats i have are full electric both fronts, do you know if i have to change the BCM to suit the seats or can i just simply wire up the drivers seat with the existing wiring and some how piggy back the passenger side?? or would the wiring be in the door runners or foot well
Thanks in advance
Chris