Welcome to Just Commodores, a site specifically designed for all people who share the same passion as yourself.

New Posts Contact us

Just Commodores Forum Community

It takes just a moment to join our fantastic community

Register

help setting gains

Greggles_VS

The Noob
Joined
Jul 18, 2012
Messages
530
Reaction score
0
Points
0
Location
Adelaide
Members Ride
VS Acclaim V6 Ecotec
I've just installed 4 Kenwood 270watt max 60watt rms speakers in a mates car, head unit is a 4x40watt clarion vz402a but speakers are powered off a 470watt 4 channel 4x60watt rms clarion amp. Now I followed the mtx video on YouTube about how to set gains to the right voltage. All rca cables are in correct, each speaker is set correctly, my target voltage per channel is 15.48v. I've managed to set channel 3 and 4 to 15.5v however channel 1 and 2 are stuck at 6.2v which is the minimum, I've adjusted the gains screw for those channels however the voltage doesn't change above 6.2v. How do I get it to the desired 15.5v? Cheers
 

Tasmaniak

Not a valid input....
Joined
Apr 30, 2005
Messages
8,094
Reaction score
135
Points
63
Age
42
Location
S.E. Melbourne
Website
www.ranjinstallations.com.au
Members Ride
VR Stato, C180 Kompressor, Prado and Ka
Do you have the LPF switched on?
 

Greggles_VS

The Noob
Joined
Jul 18, 2012
Messages
530
Reaction score
0
Points
0
Location
Adelaide
Members Ride
VS Acclaim V6 Ecotec
Lol we had just spent 16 hours rewiring everything installing the new hu speakers amp and hiding the wiring, being tired as #### it didn't adjust the voltage when I was adjusting the wrong screw lol
 
Top