Just Commodores Forum Community

It takes just a moment to join our fantastic community

Register

Help!!!!

Discussion in 'General' started by dougy, Apr 10, 2012.

  1. dougy

    dougy New Member

    Messages:
    3
    Likes Received:
    0
    Trophy Points:
    0
    Joined:
    Apr 10, 2012
    Location:
    mandurah
    Members Ride:
    VL 1986
    Hey just wondering if anyone can help me...
    I have a problem with my headlights everytime i turn on high beams the right indacator comes on wen low beams are on my tail lights turn off and the lights are really dim...i have done all my fuses nothing seems to be wrong there ...
    Can anybody help me its frustrating me ???
     
  2. Not_An_Abba_Fan

    Not_An_Abba_Fan Exhaust Guru

    Messages:
    13,813
    Likes Received:
    422
    Trophy Points:
    83
    Joined:
    Aug 18, 2006
    Location:
    Bunbury, WA
    Members Ride:
    Strange Rover
    I'd say it's an earth problem. Check all the earths in the tail light sockets, they tend to go rusty and lose contact. Take all the globes out and sand the sockets clean with some emery or sand paper. Unscrew the earth from the body in the boot and sand that as well and make sure it is tight.

    Check your connections at the headlights as well.
     
  3. dougy

    dougy New Member

    Messages:
    3
    Likes Received:
    0
    Trophy Points:
    0
    Joined:
    Apr 10, 2012
    Location:
    mandurah
    Members Ride:
    VL 1986
    alrite thanks man ill give ago :spot on:
     
  4. dougy

    dougy New Member

    Messages:
    3
    Likes Received:
    0
    Trophy Points:
    0
    Joined:
    Apr 10, 2012
    Location:
    mandurah
    Members Ride:
    VL 1986
    the tail light works now but the headlight's still being a bitch when it's on lowbeam it will flash with the right indicator then the right indicator light stays on and the light doesn't work at all on highbeam ? i cleaned all the point's, checked/cleaned all socket's and still nothing
     

Share This Page