[VIC] Holden 304 efi SOLID roller cam wanted

[bjf66]

ITEM: looking for holden 304/355 Solid roller camshaft, reasonable flexible with specification

LOCATION: State and Region

CONDITION: New or Used

PRICE: Neg

can pay postage costs

CONTACT DETAILS: 0407741640

 

[Smitty]

Crane make them... plenty of choice

most speed shops... Outlaw, VPW, Enginemaster do them

 

[bjf66]

yes thought I would get a used one and regrind, was thinking smaller base circle might be better for T/bar lifters, as I'm up for new pushrods anyway

 

[Smitty]

yes thought I would get a used one and regrind, was thinking smaller base circle might be better for T/bar lifters, as I'm up for new pushrods anyway

arrrh.. different then (you said new or used)

talk to Clive then if you want to do that, he is the xpert!

Home | Clive Cams

Welcome to Clive Cams Highly skilled specialists with over 50 years of industry experience CAMSHAFT GRINDING Accurate to 1/1000th of a millimetre CAM FOLLOWERS And Rockers Specialists 1/821B Howitt Street, Wendouree 3355 Welcome to Clive Cams Since 2001, Clive Stenlake and the team at Clive Cam ...

www.clivecams.com.au

 

[bjf66]

yes he is on my list to phone, any more cam companies out there other than Crow

 

[shane_3800]

yes thought I would get a used one and regrind, was thinking smaller base circle might be better for T/bar lifters, as I'm up for new pushrods anyway

You shouldn't grind roller cams.
Pretty much everything for Holden in roller is 4xxx series steel and has a thin case hardening.