Welcome to Just Commodores, a site specifically designed for all people who share the same passion as yourself.

New Posts Contact us

Just Commodores Forum Community

It takes just a moment to join our fantastic community

Register

Holden Supercharger and Turbo Kit SPECIALS

Status
Not open for further replies.

Motorculture

Member
Joined
Oct 20, 2011
Messages
735
Reaction score
4
Points
18
Location
Sydney, Australia
Members Ride
VY SS Commodore


VE V8 Eaton Supercharger Kits



  • Manufactured by Magnuson Products in the USA.
  • Complete Kit Includes Water to Air Intercooler with high flow heat exchanger.
  • Eaton’s latest supercharger design. Twin Vortices (TVS), Four Lobe Rotor Supercharger. Quieter and more efficient than previous designs.
  • Positive displacement supercharger for increased low down power and torque.
  • Runs inline with the factory belt system
  • Self-contained lubrication for quick and easy installation.
  • Supercharger driven by a shaft which runs outside of the supercharger for a more direct air path. The shaft is also mounted high on the supercharger for superior belt wrap.
  • No cutting of vehicle required.

For more information, click HERE.

For a limited time CAPA Performance are offering Forum Members FREE Injector Upgrade on MP-1900 VE V8 Intercooled Kit
(A saving of $795) (Excludes LS-2 HSV 307kW Vehicles)


VE V8 Vortech Supercharger Kits



  • Complete Supercharger Kit Including Air to Air Intercooler.
  • Centrifugal Supercharger for a Linear Power Curve.
  • ADR Compliance Available. Contact us for more information.
  • Reverse Rotation Vortech Supercharger runs inline with the factory belt system for quick and easy installation.
  • Sealed supercharger also speeds up installation.
  • No cutting or drilling of vehicle required

For a limited time CAPA Performance are offering Forum Members FREE Injector Upgrade with the VE V8 Intercooled Basic Kit
(A saving of $795)


VT-VZ V8 Vortech Supercharger Kits



  • Complete Supercharger Kit
  • Intercooler and Crank Drive Upgrades Available
  • Centrifugal Supercharger for a Linear Power Curve.
  • ADR Compliance available for 6psi Kits.
  • Standard Vortech Supercharger is driven by an additional pulley attached to either the power steering or crank pulley depending on boost required.
  • Sealed supercharger speeds up installation.
  • No cutting of vehicle required on our non-intercooled and beam style intercooler kits.

For more information and to view available Supercharger Kits, click HERE.

For a limited time CAPA Performance are offering Forum Members:

  • FREE Injector Upgrade on Basic LS-1 Tuner Kit (A saving of $795)
  • $700 cash-back on ALL Intercooled LS-1 Kits


Gen III Turbo Basic Kit


* Actual Product may vary to actual image shown

All CAPA turbocharger kits are manufactured to the highest quality levels. Heart of the system is a Garrett Ball Bearing Single turbocharger rated at 500kw maximum output. Being from one of the largest original equipment turbocharger manufacturers in the world, extreme durability is our guarantee

400kw of genuine turbocharged power and over 650Nm from 2200rpm – 5500rpm are available instantly with the CAPA turbo system at a twitch of the throttle. This is the CAPA secret, swift response, rapid acceleration, with all the benefits of excellent emission control, near stock fuel economy, and a torque curve unmatched by any other type of LS1 forced induction.

For more information, click HERE.


For a limited time CAPA Performance are offering Forum Members a VT-VY Basic Turbo Setup (Manifold & X-Over Pipe (Black) / GT40 Turbo / Wastegate / Oil & Water Lines ) for ONLY $3,995


For all enquiries or to place an order please quote your Forum Name & Promotional Code (CAP-MOTOCULT)



You can contact us directly with the details below:

Phone: (08) 8582 3499

Email: [email protected]

Website: Centrifugal Air Pumps Australia (CAPA Performance)

Address:

CAPA Performance
Lot 10 Kay Ave
BERRI SA 5343
AUSTRALIA
 
Status
Not open for further replies.
Top