Welcome to Just Commodores, a site specifically designed for all people who share the same passion as yourself.

New Posts Contact us

Just Commodores Forum Community

It takes just a moment to join our fantastic community

Register

How do you remove pcv valve from a VN V6 series one

Susanna

New Member
Joined
Feb 17, 2019
Messages
18
Reaction score
0
Points
1
Age
55
Location
Wyndham Vale,VIC,3024
Members Ride
Vn commodore
Hi
Thanks for ur help on my last thread.
I need to remove the pcv valve on my VN V6 series one commodore to clean it. Taking that upside down "U" hose is easy, but not sure how to take out the actual pcv Valve....is it screw in/out...or do I just pull it out from the rubber grommet on the engine??. If so it's pretty hard..
Need help on this one guys.
Thanks once again
 

immortality

Can't live without smoky bacon!
Staff member
Joined
Apr 15, 2006
Messages
17,940
Reaction score
7,063
Points
113
Location
Sth Auck, NZ
Members Ride
HSV VS Senator, VX s2 Calais S/C
It should just pull out of the rubber grommet.
 

immortality

Can't live without smoky bacon!
Staff member
Joined
Apr 15, 2006
Messages
17,940
Reaction score
7,063
Points
113
Location
Sth Auck, NZ
Members Ride
HSV VS Senator, VX s2 Calais S/C
It's been there 27 odd years? It's probably got some built up **** holding it inplace and the rubber has probably gone a bit hard. Spray some WD40 around it and work it a bit and it should pull out. Rubber grommet stays in the manifold.
 

Susanna

New Member
Joined
Feb 17, 2019
Messages
18
Reaction score
0
Points
1
Age
55
Location
Wyndham Vale,VIC,3024
Members Ride
Vn commodore
It's been there 27 odd years? It's probably got some built up **** holding it inplace and the rubber has probably gone a bit hard. Spray some WD40 around it and work it a bit and it should pull out. Rubber grommet stays in the manifold.
 
Top