VS_Pete
Donating Member
- Joined
- Dec 23, 2007
- Messages
- 5,066
- Reaction score
- 29,582
- Points
- 113
- Location
- Brisbane
- Members Ride
- VE II SV6 MY12 SPORTWAGON
7) use a little non-hardening silicone (the red RTV silicone or locktight 2{spelling?}around the entire gasket area of the water pump and block, then add the gasket supplied (so the gasket is between 2 layers of silicone) Dont use so much silicone your cleaning it off for a month, but enough to seal it.
Hi guys.
Can I just use good old Gasket Goo on gasket and bolts (I have some at home)?
I use it on the thermostat housing and bolts with no leaks.
On the older cars you could move the fan blade to see if the bearing was bugged.
I did this on the VS water pump pulley and have movement.
Cheers guys.
Hi guys.
Can I just use good old Gasket Goo on gasket and bolts (I have some at home)?
I use it on the thermostat housing and bolts with no leaks.
On the older cars you could move the fan blade to see if the bearing was bugged.
I did this on the VS water pump pulley and have movement.
Cheers guys.