Rusty
٩(-̮̮̃•̃)۶
- Joined
- Mar 27, 2010
- Messages
- 1,048
- Reaction score
- 23
- Points
- 0
- Location
- Queensland
- Members Ride
- Vt with VU/VZ bits
Hi guys,
Am looking at cutting some rust out of the boot of a VL Commodore. First thoughts were to angle grind the affected metal, treat and paint.
Was wondering what the best method is to cut rust from the boot section that sits about a cm above the fuel tank. I am not too keen on using the angle grinder for obvious reasons.
I was thinking of using steel wire on a drill or going to town with sandpaper but am hoping an easier option exists!
Any info much appreciated,
Cheers guys
Am looking at cutting some rust out of the boot of a VL Commodore. First thoughts were to angle grind the affected metal, treat and paint.
Was wondering what the best method is to cut rust from the boot section that sits about a cm above the fuel tank. I am not too keen on using the angle grinder for obvious reasons.
I was thinking of using steel wire on a drill or going to town with sandpaper but am hoping an easier option exists!
Any info much appreciated,
Cheers guys