Welcome to Just Commodores, a site specifically designed for all people who share the same passion as yourself.

New Posts Contact us

Just Commodores Forum Community

It takes just a moment to join our fantastic community

Register

how to get off this exterior piece?

Goon

Scientific Tuning
Joined
Feb 20, 2006
Messages
2,508
Reaction score
9
Points
38
Location
BrisVegas. QLD
Members Ride
VY CUSTOM.
Hey all this exterior piece has got me stuff, thre plastic clips behind it are stuck in good.. any ideas on the tool or method i should try to get it off?

Ive only broken one piece on my ride so far, i got patience!!

But im buying my manual late tommrow arvo, its about time, but any help before that would be great!!

goon-albums-goon-garage-picture4544-remiiit23123.jpg
 

VL Berlina 5speed

Apprentice Panel Pusher
Joined
Oct 3, 2005
Messages
2,684
Reaction score
30
Points
0
Age
35
Location
Adelaide
Members Ride
Project VL Show car, VS Exec, VY Ute, YZ250F
3 screws in the door edge
one on the point right at the bottom rear

then slide it upwards along the pillar and the clips will slide off the trim and stay in the pillar

then use two small flat screw drivers and get under both sides of the clips to push the tags in and it will drop out
 

Goon

Scientific Tuning
Joined
Feb 20, 2006
Messages
2,508
Reaction score
9
Points
38
Location
BrisVegas. QLD
Members Ride
VY CUSTOM.
3 screws in the door edge
one on the point right at the bottom rear

then slide it upwards along the pillar and the clips will slide off the trim and stay in the pillar

then use two small flat screw drivers and get under both sides of the clips to push the tags in and it will drop out

Thanks mate, i couldnt figiure out how to get the dam clips out lol, cheers!!!
 

Goon

Scientific Tuning
Joined
Feb 20, 2006
Messages
2,508
Reaction score
9
Points
38
Location
BrisVegas. QLD
Members Ride
VY CUSTOM.
Woo finally got them off with patience!!

Got my new manual book today too its really advacing my project progress!!
 
Top