How to install Power Windows

[jbangr]

hey bud was wjust wondering is this similar to a vx or completely diff, i have all four regs manin swith near gera stick all door looms and i thinki have to get some sort of module where could i possubly get this cheers really keen but dont know what to do

 

[turmoil117]

Does anyone know if I can wire up a vy/vz master switch in my vn?

 

[MingeyMatt]

Will be doing this very soon with my VT. Appreciate the write up

 

[tezza]

The thread was a great help. I put the power windows in my ute today and its a real easy job. The longest part was getting the window back on the runners again, but that wasnt too bad.
Just need some switches now! Here are some tips I found along the way when fitting this to my VS ute.

- I used M6 bolts which fit through the door and power window bracket after drilling out the existing rivets
- The auto down function will only work with some low BCM's although no problems with a mid BCM
- Since I just changed the low 148 BCM to a 150 BCM, I didnt want to go and get another mid BCM, so I bypassed the BCM by connecting the green/black wire from the BCM to the green/orange wire in the door loom.
This enables the drivers window to go down, although you lose the auto down feature and functionality.

Here are some pictures

 

[Tw1n Tur6o]

Cheers for the guide, almost finished doing mine just gotta clean up the interior.
Also what are the left over wires for on the plug?

 

[tezza]

Which wires and plugs are you talking about?

 

[eddyinau]

Which wires and plugs are you talking about?

how much did it cost for all the parts?

 

[tezza]

how much did it cost for all the parts?

Switches were about $30 for two rear door ones (mine went in a ute) and regulators were about $40 odd each from Pick n Payless.
I got the additional switch loom from Pick n Payless as well.

If your going to go and remove the regulators from Pick and Payless, bring a drill with you

 

[VKCOMMO]

Cab someone tell me if VZ calais switches would work in a VP?

 

[VN-855]

any one know how to bypass the control module on the vn's ? bustin my chops tryna figure this out