Welcome to Just Commodores, a site specifically designed for all people who share the same passion as yourself.

New Posts Contact us

Just Commodores Forum Community

It takes just a moment to join our fantastic community

Register

How to put lower glove box clips. Kindly advise

Migs

New Member
Joined
Aug 2, 2020
Messages
2
Reaction score
0
Points
1
Age
30
Location
Doonsidr
Members Ride
2005 commodore
I've been struggling to find a tutorial on how to attach these things in the lower glove box.

1596338198431.png
 

Drawnnite

Obviously Unsensible
Joined
Sep 2, 2010
Messages
1,467
Reaction score
253
Points
83
Location
Victoria
Members Ride
2000 Vs Ute
From memory, the black bits slide on, just be careful not to break the bits they slide onto on the glovebox.
Blue bits i havent taken them off before, but the glovebox simply clicks in/out of them.
 

ephect

Donating Member
Joined
Jul 27, 2006
Messages
4,869
Reaction score
1,505
Points
113
Location
Melbourne
Members Ride
VS Acclaim V6
The Blue pieces slide on, from top down, over the metal. Factory pieces are grey (on my in-laws vz)

Sorry no advice on the black pieces.
 

markalan1two

Smile and wave boys !!!!
Joined
May 23, 2014
Messages
588
Reaction score
292
Points
63
Age
49
Location
NSW
Members Ride
X5 BMW, GenF2 GTS, HSV Y R8, Audi S3, Corolla
black rubber pieces go on the side of the glove box to stop it falling open, blue piece are the "hinge" and go on the bottom. Open the glove box if it doesn't drop open you will need to get a thin screwdriver and push the original black part in so that it opens fully. then pull the glove box lid up at a 45 degree angle and it will come away from the box.
 

Migs

New Member
Joined
Aug 2, 2020
Messages
2
Reaction score
0
Points
1
Age
30
Location
Doonsidr
Members Ride
2005 commodore
black rubber pieces go on the side of the glove box to stop it falling open, blue piece are the "hinge" and go on the bottom. Open the glove box if it doesn't drop open you will need to get a thin screwdriver and push the original black part in so that it opens fully. then pull the glove box lid up at a 45 degree angle and it will come away from the box.
thanks mate
 
Top