Welcome to Just Commodores, a site specifically designed for all people who share the same passion as yourself.

New Posts Contact us

Just Commodores Forum Community

It takes just a moment to join our fantastic community

Register

how to read error codes

dan666

New Member
Joined
Dec 16, 2009
Messages
15
Reaction score
0
Points
0
Members Ride
VT S2
hi,
alright so I've tried several times to check my vt for errors, ive read on here that its possible; i use a paper clip and i bridge pins 5 n 6 under the dash then turn car to on and i'm suppose to count the light flashes.

but this dosnt work, all that happens when i do this is i blow my ecu fuse and/or get serv. error so the car pretty much wont function at all. btw replacing the 10a fuse under the bonnet stops the serv. error and the car will funtion again (if anyone else is having the problem)..

but can any body help me?, would rather not have holden charge to do this, if it is possible to do at home :)
 

BECS

New Member
Joined
Oct 24, 2006
Messages
23
Reaction score
0
Points
0
Members Ride
VT SUPERCHARGED
Not sure why you are blowing fuse unless you have the wrong plugs
 

Attachments

  • Diagnosis connector.jpg
    Diagnosis connector.jpg
    8.1 KB · Views: 1,025

dan666

New Member
Joined
Dec 16, 2009
Messages
15
Reaction score
0
Points
0
Members Ride
VT S2
thanks mate! worked that time. maybe i had the wrong pins..
i seem to be getting the following codes, so pretty sure i'm reading it right

12,31,43,92,12

then repeats
 
Top