anarklov3r
Member
- Joined
- Aug 18, 2008
- Messages
- 665
- Reaction score
- 8
- Points
- 18
- Location
- Melbourne
- Members Ride
- 2007 WM Caprice
Hey guys, Im gonna go down to a wrecker to source out the wiring loom for a power window conversion.
I've got the door looms that run through the doors into the pillars, all the switchs and regulators.
I just need the loom that runs down the body etc and into the switchs (centre console)
But apparently i also need a loom that runs behind the dash that connects to the power window module, and to get to this you need to completely remove the dash as its cable tied to it.
I've googled and googled until my eyes have gone googly themselves and i havent found a step by step guide on how to completely remove the dash!
I Just dont wanna go there and "fiddle" for hours trying to get the dash out, id rather just know.
Thanks guys!
I've got the door looms that run through the doors into the pillars, all the switchs and regulators.
I just need the loom that runs down the body etc and into the switchs (centre console)
But apparently i also need a loom that runs behind the dash that connects to the power window module, and to get to this you need to completely remove the dash as its cable tied to it.
I've googled and googled until my eyes have gone googly themselves and i havent found a step by step guide on how to completely remove the dash!
I Just dont wanna go there and "fiddle" for hours trying to get the dash out, id rather just know.
Thanks guys!