Welcome to Just Commodores, a site specifically designed for all people who share the same passion as yourself.

New Posts Contact us

Just Commodores Forum Community

It takes just a moment to join our fantastic community

Register

How to remove rear bumper vz commodore wagon

rambunctious

Well-Known Member
Joined
Jun 9, 2011
Messages
2,345
Reaction score
2,123
Points
113
Location
Alexandra Headland Qld
Members Ride
VZ Executive Wagon
For this you are best to go to the VZ section (scroll down on left of home page) then go to search on top right and type in remove rear wagon bumper
and you should get something like this
 

aqgwrecker

New Member
Joined
Feb 19, 2023
Messages
1
Reaction score
1
Points
0
Age
23
Location
western Australia
Members Ride
1
How to remove rear bumper on a vz commodore wagon
Here are the general steps to remove the rear bumper on a VZ Commodore wagon:

  1. Start by opening the tailgate of the wagon.
  2. Remove the plastic cover on the inside of the tailgate by unscrewing the screws that hold it in place.
  3. Locate the screws that hold the bumper cover to the tailgate. These screws are located on the top edge of the cover, near the corners.
  4. Unscrew the screws with a screwdriver and set them aside in a safe place.
  5. Gently pull the bumper cover away from the tailgate. It should come off easily, but if it's stuck, check for any clips or screws that may be holding it in place.
  6. Once the bumper cover is removed, you will see the actual bumper. Locate the bolts that hold the bumper to the chassis of the car. These are usually located underneath the car, near the rear wheels.
  7. Use a wrench to loosen the bolts and remove them.
  8. Once all the bolts are removed, gently pull the bumper away from the car. It should come off easily.
Remember to be careful while removing the bumper as it can be heavy and awkward to handle. It's also a good idea to have an assistant to help you with the removal process.
 
Top