Welcome to Just Commodores, a site specifically designed for all people who share the same passion as yourself.

New Posts Contact us

Just Commodores Forum Community

It takes just a moment to join our fantastic community

Register

How to remove rear exhaust rubbers?

hsvboy1978

New Member
Joined
Nov 17, 2010
Messages
1
Reaction score
0
Points
0
Location
Melboutne
Members Ride
VR Commodore
I tryed to remove the old exhaust rubbers on my VR wagon to install new one's for a roadworthy, Is there any special way to get them off and get the new one's on?
 

ashleysnep

Donating Member
Joined
Jun 10, 2005
Messages
1,061
Reaction score
11
Points
38
Location
Ruse, NSW
Members Ride
355 VN GRP A REP
What ones? Figure 8? The one with 4 holes?

Figure 8 you might need someone to push the exhaust over to on side so you can get the first one of as for the other WD40 it so it slips over the lump on the mount.
 

woteva

NEED 4 SPEED
Joined
Jul 18, 2005
Messages
2,094
Reaction score
6,199
Points
113
Location
Adelaide S.A.
Members Ride
VE2 Sportwagon - VR2 V6 ecotec Wag - VS2 V6 Wag
I just cut them to remove the old ones.
To fit the new ones, I usually bend the end tabs on the brackets and use a large screwdriver.
 

bpefi

Tech
Joined
Nov 5, 2009
Messages
260
Reaction score
3
Points
0
Location
Bundaberg
Members Ride
Hilux Ute - Vs Ecotech Engine
I had a tool which was basically a hook with a handle made out of 3 mm steel rod - worked well for a lot of them
 

Mattimus

New Member
Joined
May 24, 2009
Messages
97
Reaction score
0
Points
0
Members Ride
VS Executive S1
Really? I somehow just did them by hand, didn't even know there was a special way to do it haha
 
Top