Welcome to Just Commodores, a site specifically designed for all people who share the same passion as yourself.

New Posts Contact us

Just Commodores Forum Community

It takes just a moment to join our fantastic community

Register

How to remove the genie extractor on driver side?

samsungd838

New Member
Joined
Jun 23, 2010
Messages
14
Reaction score
0
Points
0
Members Ride
VT Commodore
hi i want to clean the extractor while i am replace the gasket
i have already unbolt the extractor from both side but cant slide it out
which is different from what exhaust people said
do i have to remove the 2 bolts on steering colunm and slide steering column backward to get the extractor out?
 

Burnout124

Member
Joined
Jan 31, 2011
Messages
258
Reaction score
0
Points
16
Location
Western Australia
Members Ride
VY Executive S2/ VY SS 6sp
you should be abel to remove the tube that gose around the steering colunm then you can get the lot out .
 

E-T-H-A-N

New Member
Joined
May 23, 2009
Messages
159
Reaction score
0
Points
0
Location
gawler, adelaide
Members Ride
vt s pack manual
nahh its not that easy, you do have to drop the steering rack out man ive had to do it a few times. just undo it from the K frame and let it hang while you pull them out, make sure they are un bolted from the Y pipe aswell.
 

Not_An_Abba_Fan

Exhaust Guru
Joined
Aug 18, 2006
Messages
14,564
Reaction score
1,203
Points
113
Location
Bunbury, WA
Members Ride
Strange Rover
As above, undo the two bolts that hold the rack in, and undo the coupling on the steering shaft, then pull the rack backwards off the K frame and push it as far as you can to the right. The extractor comes out from the bottom.
 
Top