Axleboy
New Member
- Joined
- Apr 10, 2009
- Messages
- 6
- Reaction score
- 0
- Points
- 0
- Location
- Mighty Radelaide
- Members Ride
- VX Calais SuperV6 Series 2
This is just a simple post about how to replace your Calais badge (or any badge for that matter) with another one.
I did this because the one I had on there previously was coming loose and needed to be replaced as you may or may not see in this picture cos it's not a very choice photo.
All I did was put some tape around the outside of the badge so I knew exactly where to put the new one.
And then I got some tooth floss and basically sawed at it until it came off, and the got some turps and a paper towel and rubbed the excess glue off and the replaced it with a new badge which I got from eBay which you can see here.
I did this because the one I had on there previously was coming loose and needed to be replaced as you may or may not see in this picture cos it's not a very choice photo.
All I did was put some tape around the outside of the badge so I knew exactly where to put the new one.
And then I got some tooth floss and basically sawed at it until it came off, and the got some turps and a paper towel and rubbed the excess glue off and the replaced it with a new badge which I got from eBay which you can see here.