how to reset ve commodore sv6 ecu?

[HEXEM]

This is the process for the VE V8 (E38 ECM Reset) Not sure for a V6.

ECM reset.

Ignition off.
Pull ECM fuses. ( In the VE there is one where the battery is(little black box) and the other in the fuse box in the engine bay)
Turn ignition on (DO NOT START ENGINE) till the warning chimes sound.
Turn Ignition off.
Replace fuse/s.
Turn ignition on and check that all is OK.

Cheers

 

[Troy711]

Yes, a few steps involved tho.

1. Tune the radio to 88.0 FM
2. With the key in and turned to acc put the interior light on
3. Pump the brake 4 and a half times
4. Turn the interior light off and at the same time open the glove box and the passenger side door
5. Take the hand brake off and put it in reverse
6. Now tune the radio to 107.6Fm
7. Pop the fuel cap while rubbing your nipples slowly
8. Now turn your car on and it will reset to 0

Easy as that!

I'd love to know if he actually tried this hahaha

 

[1uzVN]

i tried this on my ve ls3 and it now has an engine light on
also it started telling me esc was off and to take car to dealer??
when fuse back in it had an engine light on?
is the the right way??
auto is shifting hard again and isnt flairing so it must have reset that part
how do i clear the code
try the key i -on-off -out heaps didnt work

HEXEM


This is the process for the VE V8 (E38 ECM Reset) Not sure for a V6.

ECM reset.

Ignition off.
Pull ECM fuses. ( In the VE there is one where the battery is(little black box) and the other in the fuse box in the engine bay)
Turn ignition on (DO NOT START ENGINE) till the warning chimes sound.
Turn Ignition off.
Replace fuse/s.
Turn ignition on and check that all is OK.

Cheers

 

[sick_SV8]

Who knows. But just disconnecting the battery isnt going to the job every time and wont restore ALL factory settings.best off taking it to someone who can hook up to diagnostics eg. HOLDEN.....unless you got the program and connections to you pc/laptop and just do it yourself.
Easy as that.

 

[VE GTs Mark]

There is a secret formula for this question I suggest you don't disconnect anything these cars are like an ATM machine 3 strikes and your out lol Off course Holden wouldn't have it any other way !

 

[PRAVX II S]

does anyone know how to reset the ecu? disconnect the battery pump the brake or something? i heard you can disconnect fuse and it will do the job

Yes you can. Using the tech2 there is a option to reset Ecu.
Why do you want to do this.
If your in Sydney I can do this for a small fee as I own a tech2

 

[VS_Pete]

^^^^^^^^^^
OMG op hasn`t been on here for over 3yrs.

 

[bfhoon]

I just tried the below and can confirm it works top stuff

Yes, a few steps involved tho.

1. Tune the radio to 88.0 FM
2. With the key in and turned to acc put the interior light on
3. Pump the brake 4 and a half times
4. Turn the interior light off and at the same time open the glove box and the passenger side door
5. Take the hand brake off and put it in reverse
6. Now tune the radio to 107.6Fm
7. Pop the fuel cap while rubbing your nipples slowly
8. Now turn your car on and it will reset to 0

Easy as that!